Adjustments
Rear Wheel Toe-in (Fig. 7)
1. Measure center–to–center distance (at axle height)
at front and rear of steering tires. Front measurement
must be 1/8 in. less than rear measurement.
2. To adjust, loosen clamps at both ends of tie rod.
3. Rotate tie rod to move front of tire inward or outward.
4. Tighten tie rod clamps when adjustment is correct.
1
Figure 7
1. Tie rod
®
Adjustments
Page 9 - 4
Reelmaster
223-D/5100-D/5300-D