Special Tools; Special Tools - Toro Reelmaster 5100-D Service Manual

Special Tools

NOTE: Special tools may be ordered from:
Owatonna Tool Co.
2013 4th Street, NW
Owatonna, MN 55060
Digital Multimeter
The meter can test electrical components and circuits
for current, resistance, or voltage drop.
NOTE: Toro recommends the use of a DIGITAL mutli­
meter when testing electrical circuits. The high imped­
ance (internal resistance) of a digital meter will ensure
that excess current is not allowed through the meter.
Excess current can cause damage to a circuit that is not
designed to carry it.
Inductive Ammeter (AC/DC Current Transducer – Hall Effect)
Use this tool, connected to a Digital multimeter for doing
current draw tests. This tool can be useful when check­
ing glow plug and starter circuits.
Skin-Over Grease
Special non-conductive grease which forms a light pro­
tective skin to help waterproof electrical switches and
contacts (Fig. 2).
Toro P/N 505–47 8 oz. (.24 L) can
®
Reelmaster 5100-D
Some tools may bebe listed in the Reelmaster 5100-D
Parts Catalog or sold under Toro Model Numbers. Some
tools may also be available from a local supplier.
Page 5 - 5 Rev. B
Figure 1
Figure 2

Special Tools