Toro Reelmaster 5100-D Service Manual page 211

4. Remove the inner axle shaft seal (Fig. 8). Discard the
seal and replace with a new one at the time of assembly.
5. Center punch the outside of the retaining ring (Fig. 9).
6. Drill a 1/4 inch hole (approximate) into the outside of
the retainer ring to a depth of about 3/4 the thickness of
the ring (Fig. 10).
IMPORTANT: Drilling completely through the
retainer ring could damage the shaft.
®
Reelmaster 5100-D Page 6 - 5
Figure 8
Figure 9
Figure 10
Repairs