Installing the Engine
1. To install the engine, perform steps 2 - 17 of Removing
the Engine in reverse order.
2. Install a new engine oil filter. Fill engine with the
correct oil. Fill the cooling system with a 50/50 solution
of ethylene glycol antifreeze and clean, soft water.
Check for oil and coolant leaks and repair as necessary.
3. Adjust throttle linkage (See Throttle Linkage Adjust
ment in the Adjustments section of this chapter).
®
Reelmaster
223-D/5100-D
Page 3 - 45
Removing and Installing the Engine