Table of Contents
Advertisement
4 Checks before starting the machine
4.3 Checking and topping up the engine oil level
At operating temperature, the oil and the gauge area are hot.
Avoid the hot oil or the components coming into contact with your skin to avoid any physi-
•
Once the engine oil is at the appropriate level, close the bonnet again.
•
Select the oil according to the temperature. If you start the engine at temperatures below 0°C,
use an SAE 10W, an SAE 10W-30 or SAE 15W-40 even though the daytime temperature rises to
10°C.
-
-20
SAE 10W CD
En-
gine
oil
Do not mix different types of oils.If you need to top up the oil with a different make or type
from the oil left in the tank, remove the remaining oil completely.
82
WARNING
cal injuries.
4. Clean the gauge with a cloth to remove any oil
deposits.
5. Insert the gauge into its tube.
6. Remove it. The engine oil level must be be-
tween markers H and L.
•
ing hole and top up to marker H.
F = Filler hole
•
excess quantity of oil via the drainage cap (P) then
check the level again.
Temperatures °C
-10
0
10
SAE 10W-30CD
SAE 15W-40 CD
IMPORTANT
1. Wait until the engine has cooled down.
2. Open the bonnet with the ignition key.
3. Read the engine oil gauge. (G)
If the oil level is below marker L, open the fill-
If the oil level is above marker H, remove the
Note
Do not pour the excess engine oil onto the
ground or the road.
+
20
30
Quantity prescribed (L)
3,7
+ 0,4
Oil filter
Advertisement
Table of Contents
