Table of Contents
Advertisement
2 Usage precautions
2.1.6 Fasten your safety belt and adjust the rearview mirror(s)
•
The operator's seat is fitted with a safety belt.
•
Always fasten your safety belt and adjust it before
starting the machine.
The seat belt must be replaced after an accident or if it is damaged.
•
The seat and its support must be checked by your dealer after an accident.
•
If the seat and/or its support are damaged they must be replaced immediately.
•
Adjust the rearview mirror(s) so that you have perfect visibility around the machine.
2.2 Movement precautions
2.2.1 Machine's Danger Zone
The operator must manipulate the machine controls from the operator seat. Any use of
the machine controls from the ground is strictly prohibited because it can lead to physical
Start the engine and run the machine only from the operator seat.
•
A signaller must be provided when the working site
is dangerous or has poor visibility.
•
Keep all other people away from the working site or
movement route of the machine.
•
Keep any other persons out of the danger zone repre-
sented by the equipment's operating radius.
Equipment operating range= 5m
•
Alert people nearby using the horn or any other si-
gnal before starting the machine.
If a person is in the machine's danger zone, it may be struck by the machine's moving
parts or be wedged between the machine's lower and upper parts, which can result in se-
66
WARNING
DANGER
injury.
WARNING
DANGER
rious injury or death.
Advertisement
Table of Contents
