Table of Contents
Advertisement
2.2 Precautions during maintenance
2.2.1 Oil and grease
Oil, grease or other fluids may be sprayed when certain parts are maintained.
For maintenance in complete safety, respect to the letter the procedures described in the fol-
Do not mix different types of oils.If you need to top up the oil with a different make or type
from the oil left in the tank, remove the remaining oil completely.
2.2.2 Tools
2.2.3 Parts
•
Use YANMAR original parts as recommended in the parts catalogue.
•
Clean parts with a non-combustible and non-aggressive detergent.
•
If you need to remove a seal or a hydraulic component, refer to the maintenance manual.
•
Always use oils and greases recommended by
YANMAR.
3 Recommended greases and fluids, page 137
•
Use clean oils and greases. Avoid any contamina-
tion by dust.
WARNING
lowing chapters.
IMPORTANT
•
Use tools that are adapted to the planned task.
•
The use of damaged , worn or inappropriate tools is
very dangerous and there is a risk that the machine will
be damaged.
2 Maintenance precautions
133
Advertisement
Table of Contents
