5 L
IST OF PERIODIC INSPECTIONS AND MAINTENANCE
OPERATIONS
•
The table below indicates the maintenance intervals to be respected for optimum operation of
the machine. Read the machine's time counter every day to check whether a procedure should be
implemented.
•
The inspection sheets provided at the end of this manual enable you to keep a trace of the
maintenance operations carried out.
These are frequencies : for examplen the operations to be carried out every 50 hours must
•
Certain intervals may vary if a hydraulic hammer is used. Refer to the corresponding notes.
Y :
X:
IMPORTANT
be carried out at 50h, 100h, 150h, 200h, etc.
1
2
Note
•
If a hydraulic hammer is used, the re-
turn filter must be replaced after 100 or
150 hours of service for a new machine,
then according to the diagram opposite.
•
The hydraulic oil must be replaced
more frequently if a hydraulic hammer is
used. Comply with the diagram opposite.
1 = Hydraulic oil
2 = Hydraulic oil return filter
X = Hydraulic hammer usage rate (%)
Y = Replacement interval (h)
139