Table of Contents
Advertisement
9 Rubber tracks
•
Keep the tracks at their adequate tension to
avoid them coming off. If the voltage is too
low, the machine can throw a track in the fol-
lowing circumstances:
– When there is a significant difference in
level, there is a spacing between the tracks and
the rollers.
1 = Track
2 = Tightener roller
1
2
– When you carry out side movement in re-
verse, there is another spacing between the ten-
sion roller and the track.
3 = Idle wheel
– when the machine is moving although the
tracks have been blocked to the side by an
obstacle.
– when the idler pulley and the rollers are not
aligned with respect to the tracks.
A = Chassis side
B = Rubber track side
– when you are reversing under these
conditions.
A
B
=
9.5 Track maintenance
6.4 Rubber track maintenance, page 147
97
Advertisement
Table of Contents
