14.2 Mounting the accessory
Before performing any maintenance operation, remove residual pressure in the hydraulic
Always drain the machine's oil into a safe container and never directly onto the ground.
1. Stop the engine.
2. Remove the caps.
3. Connect the hydraulic tool's hoses.
Hydraulic oil rate at nominal engine speed :
1 Specifications, page 165.
14.3 Precautions for using the accessory
•
Follow the procedures described in the user manual provided by the accessory's
manufacturer.
Hydraulic hammer (single action accessory)
•
Set the return pipe selector valve to the position for a single action accessory.
•
The hammer works when the proportional roller is operated.
Tilting bucket
•
Position the return circuit selector valve to the position for a dual action accessory.
•
Use the proportional roller to operate the accessory.
WARNING
circuit.
2.1.2 Removing the residual pressure, page 131
14 Implementing the 3rd hydraulic circuit
113