Table of Contents
Advertisement
Crack
1 = Repair if over 60 mm
2 = Not yet to be repaired
•
To find out whether the track must be replaced, repaired or you can continue to use it, contact
your YANMAR dealer.
6.4.2 Track replacement
•
If a track (or both tracks) needs to be replaced, contact your dealer.
•
A new track must be checked for the first time after 30 hours.
6.4.3 Tension check
Be sure to perform the track tension verification on a firm and even surface. It is strictly
forbidden to be positioned under the machine for the duration of the operation.
•
If a crack appears between the track attach-
ment inserts, repair it if the length of the crack
reaches 60 mm. If the interior steel cable is ex-
posed, repair the track immediately even if the
crack is a small one.
•
If the length of the crack is less than 30 mm
or if the depth of the crack is less than 10 mm,
you do not need to repair the track.
1. Move the machine so that the seal on the internal sur-
face of the track is placed in the centre of the upper
chassis.
A = Mark
inside the track
1 = Cover
2 = Idle wheel
2. Raise the machine with the equipment by activating
the command lever.
WARNING
6 Maintenance by the operator
149
Advertisement
Table of Contents
