Table of Contents
Advertisement
2.3.10 Working in a muddy area
•
Operate the machine carefully so that it does not get stuck. If it does get stuck, release it using
the following procedures.
If only one track is stuck
When you raise the machine, support yourself on the ground with the lower part of the
bucket (and not with the teeth). The angle between the boom and the arm must be 90° to
If both tracks are stuck
2.3.11 Working in an area with reduced visibility
•
When working in a dimly-lit area, switch on the lights and front headlights and provide addi-
tional lighting if necessary.
•
Stop all work when fog, snow or rain hinders your visibility.
1. Place the bucket on the muddy side.
2. Lift the track.
3. Place wood or a wedge under the track
runners.
4. Raise the bucket.
IMPORTANT
110°.
1. Place a log or piece of wood under the
tracks.
2. Push the bucket into the firm ground.
3. Retract the arm as if to dig and move for-
ward with the side movement levers to get out
of the mud.
2 Usage precautions
75
Advertisement
Table of Contents
