Radio; Quick Coupler - Yanmar SV26 User Operation And Maintenance Manual

7 Options

7.15 Radio

7.16 Quick coupler

Before any connection or disconnection of the hydraulic hoses, remove the residual pres-
Connecting
disconnecting
To disconnect, turn the adapter to align the ball with the groove located on the receiver and slide
the adapter backwards.
Note
The hydraulic connection locking system may vary depending on the model fitting
installed.
46
CAUTION
sure from the hydraulic circuit.
2.1.2 Removing the residual pressure, page 131
Refer to the user manual supplied with the
radio.
2= Radio
1. Insert the adapter into the receiver.A slight
click indicates that the connection is success-
ful. The ball is released from the adapter
groove located on the receiver.
2. Turn the adapter on the receiver to secure
the connection.
Note
Before each use, clean the receiver
surfaces.