Yanmar SV26 User Operation And Maintenance Manual page 157

5 List of periodic inspections and maintenance operations
Parts
Daily
Machine
Commands
Seat
Greasing points
Hydraulic oil
Hydraulic hoses
Fuel hoses
Fuel tank
Engine oil
Cooling fluid
Tracks
Radiator vents
Alternator belt
Decanter/separator
Operation of the accumulator
Electrical circuit
Motor state
Bearing rollers and bearings, idler wheels
Every 50h
Rotation pin and crown
Every 250h
Side movement and acceleration levers
Fuel filter
140
Operations
6.1.1 Checking the machine before use, page 142
6.1.3 Checking the commands, page 142
6.1.4 Checking the seat, page 142
6.1.5 Greasing points, page 143
4.5 Checking and topping up the hydraulic oil level,
page 85
6.1.9 Checking the hydraulic hoses, page 145
6.1.10 Visual inspection of the fuel hoses, page 145
4.4 Checking and topping up the fuel level, page 83
4.3 Checking and topping up the engine oil level,
page 82
4.2 Checking and topping up the level of cooling
fluid, page 81
6.4 Rubber track maintenance, page 147
Cleaning
Tension check
6.1.7 Cleaning the separator/decanter, page 144
Check
Check
16.2.1 Engine, page 120
Check
6.2.1 Greasing the pin and rotation crown, page 146
Verification and adjustment
Replacement