Table of Contents
Advertisement
Before starting the machine transportation, check the total height of the load.
15.4 Slinging the machine
Use a slinging method that is compatible with the weight of the machine
1. Pivot the upper structure so that the blade is behind the operator's seat.
2. Lift the blade to the maximum limit.
3. Place the equipment in the longitudinal axis of the machine.
4. Place all the equipment cylinders to maximum extension (except the rotation cylinder).
5. Stop the engine, put the levers in the locked position and check that you have left nothing
around the operator's seat before leaving the machine.
A = Front side
B = Back side
a. Correctly position the hooks on the tie-down points.
b. Be alert to where tie-down accessories pass; they
should not rest on sharp edges or have knots present
when tying down.
c. Make sure to load balance the various tie-downs
and do not overload them.
Never lift the machine with someone on it or on an accessory.
and that complies with current standards.
If you do not lift the machine as shown, it will be out of balance.
Do not pivot the machine when it has been raised.
Never walk under or beside a suspended machine.
15 Transporting the machine
WARNING
WARNING
a = Lifting holes at each end
3 Warning labels, page 6
117
Advertisement
Table of Contents
