Table of Contents
Advertisement
2 S
TORAGE
•
In a long-term storage, move the machine at least once a month to form new oil on all the
moving parts and remove the battery.
•
When you do not use the machine for a period of over 3 months, avoid placing the tracks in a
place that is directly exposed to sunlight or rain.
•
The conservation and recommissioning instructions, as well as the conservation date must be
placed in an impermeable envelope with a label and secured to the machine at a visible location.
•
To protect the machine against rainwater, trap it to avoid accumulation of water that can pro-
mote corrosion of metal parts.
•
The machine in prolonged storage must be regularly inspected in terms of its external appear-
ance, the condition of the protected surfaces and the protection materials. The inspection intervals
are the following :
– every 6 months under temperate weather conditions,
– every 3 months under tropical, cold, Arctica or coastal weather conditions.
160
•
You are recommended to store the machine in a
closed and covered location.
•
If the machine is stored outdoors, park it on flat
ground and cover it with a protective sheet.
•
The machine must be placed in the position il-
lustrated opposite to protect the hydraulic cylinder
rods against corrosion.
•
The locking lever(s) must be in locked in a
position to avoid any possibility of the machine
being activated accidentally.
1 = Locking
2 = Locking lever
3= Left hand side
Advertisement
Table of Contents
