Table of Contents
Advertisement
17 If the battery is discharged
17.2 Connecting the starter cables
BS = backup battery
BP = battery broken down
MP = machine engine broken down
17.3 Starting the engine
1. Check that the cables are connected safely to the battery terminals.
2. Start the engine on the repair machine and increase the engine speed to maximum.
3. Turn the starter switch of the machine that has broken down to START to start the engine. If
the engine does not start, wait at least two minutes before trying again. Do not stop the engine on
the repair machine and keep the engine speed at full rate.
17.4 Disconnecting the starter cables
•
After starting the engine on the machine that has broken down, disconnect the starter cables
in reverse order to the connection procedure.
BS = backup battery
BP = battery broken down
MP = machine engine broken down
124
1. Set the start switches on both machines to
OFF.
2. Connect the clip of the red starter cable (A) to
the positive terminal of the battery on the machine
that has broken down.
3. Connect the other clip of the red starter cable
(A) to the positive terminal of the battery on the re-
pair machine.
4. Connect the clip of the blackl starter cable (B)
to the negative terminal of the battery on the re-
pairing machine.
5. Connect the othe clip of the black starter cable
(B) to the engine block of the machine that has
broken down.
1. Remove the clip of the black starter cable
(B) from the engine block of the machine that
has broken down.
2. Remove the clip of the black starter cable
(B) from the negative terminal of the battery on
the repairing machine.
3. Remove the clip of the red starter cable (A)
from the positive terminal of the battery on the
repairing machine.
4. Remove the clip of the red starter cable (A)
from the positive terminal of the battery on ma-
chine that has broken down.
Advertisement
Table of Contents
