Table of Contents
Advertisement
2 Usage precautions
2.4 Parking precautions
2.4.1 Parking location
•
Park the machine preferably on a stable, flat and level surface.
•
If you need to park on a slope:
1. Verify that the ground offers sufficient stability over time to maintain the machine position.
2. Place the blade on the side of the slope and plant it in the ground.
3. Place the bucket opposite the blade and plant it also in the ground.
4. If you can not follow this procedure, add a wooden wedge on the uphill side of the slope at
the tracks.
2.4.2 Stopping the engine
1. Release the right and left side movement levers in neutral position to stop the machine.
2. Run the engine on idle with the accelerator lever.
Stopping the engine after a rotation at high speed risks reducing its life span. Do not stop
If the engine is overheating, do not stop it immediately. Reduce the engine temperature pro-
gressively by running it at an intermediate rotation speed before stopping it.
Do not touch the command levers before switching off the engine, or else the equipment or
the machine may move suddenly and cause a serious accident.
76
1 = Bucket in the ground
2= Blade in the ground
IMPORTANT
the engine suddenly except in an emergency.
WARNING
3. Lower the bucket to place its lower surface
in contact with the ground.
4. Lower the blade to the ground.
5. Pull the locking levers back.
1 = Locking
2 = Locking lever
3= Left hand side
6. Turn the key to OFF position to switch off
the engine and disconnect the electrical
circuit.
7. Remove the key from the ignition.
Advertisement
Table of Contents
