Using The Machine In Cold Weather; Preparation For Use In Cold Weather; Starting In Cold Weather - Yanmar SV26 User Operation And Maintenance Manual

Mini excavator
Table of Contents

Advertisement

8 U
SING THE MACHINE IN COLD WEATHER

8.1 Preparation for use in cold weather

In cold weather, you may have difficulty starting the engine because the coolant and fuel can
be frozen.
Consequently, take the following measures :
1. Use oil and fuel suitable for the outside temperature.
3 Recommended greases and fluids, page 137
2. Keep the battery charged. In cold weather, remove the battery after using the machine and
store it in a heated room to facilitate restarting the machine.

8.2 Starting in cold weather

Consult these pages and respect these safety instructions before starting up the machine.
1. Pull the acceleration lever back to full gas position.
2. Turn the key to the ON position.
a. Keep the key in the ON position to warm up the engine until the "warm-up" icon no longer
appears on the screen.
b. When the glow plug icon no longer appears on the screen, turn the key to the START position
to start the engine.
c. Release the key after the engine starts and it will return itself to ON position.
3. When the engine speed increases, move the throttle switch to the idle position.
Do not leave the key in START position for over 10 seconds.
If the engine does not start, position the key at OFF. Wait 30 seconds then restart the
Moving or operating the machine without warming it up first may affect its performance.
WARNING
2.1 Precautions before starting the engine, page 63
IMPORTANT
engine.
B= Throttle lever
93

Advertisement

Table of Contents
loading

Table of Contents