Yanmar SV26 User Operation And Maintenance Manual page 27

3 Warning labels
9
10
11
12
13
14
15
16
17
10
5.3.1 Locking lever, page 23
Measured sound pressure
3 Noise emitted by the machine, page 167
4.4 Checking and topping up the fuel level, page 83
Hydraulic oil
3 Recommended greases and fluids, page 137
4.5 Checking and topping up the hydraulic oil level, page 85
Using a grease pump, grease the pin and the rotation crown at the
greasers indicated with arrows on the figure opposite.
6.2.1 Greasing the pin and rotation crown, page 146
This sticker describes the operation of the machine controls and their
location relative to the operator seat.
= Options
5.3 Joysticks and pedals, page 22
Tie-down and slinging plans for the machine
15 Transporting the machine, page 114
Filler holes for various reservoirs on the machine and track tension
system.
3 Recommended greases and fluids, page 137
6.4 Rubber track maintenance, page 147
6.5 Steel track maintenance, page 152
Use this valve to select the 3rd hydralulic circuit in single or dual
effect.
14.1.1 3rd circuit selector, page 112