Table of Contents
Advertisement
6.3 Non periodic maintenance
6.3.1 Fuse replacement
1
1. Set the starter key to OFF position.
2. Remove the lid from the fusebox.
3. Identify the burnt out fuse.
4. Replace it with an equivalent fuse.
Fuse strip
An unsuitable fuse or a fuse holder with a short circuit may cause overheating and damage
the indicator gauges, the electric circuit or the cabling.
•
If a fuse burns out immediately after it is replaced, this means there is a problem in the elec-
tric circuit. Contact your dealer for a diagnostic and an intervention.
6.3.2 Top up the windscreen washer fluid. ( for cab )
6.3.3 Replacing the windscreen wiper ( for cab )
•
Replace the windscreen wiper when it no longer cleans the windscreen correctly. Follow the
procedure indicated by the windscreen wiper manufacturer.
6.3.4 Accessory state check
•
When working on an accessory, please contact your dealer or refer to the manufacturer user
manual supplied with the accessory.
General supply fuses
IMPORTANT
1. Open the windscreen washer tank. (1)
2. Top up the windscreen washer fluid. Do not over
fill the windscreen washer tank.
Do not let any impurities into the tank.
6 Maintenance by the operator
IMPORTANT
147
Advertisement
Table of Contents
