Maintenance By The Operator; Daily Maintenance; Checking The Machine Before Use; Checks After Using The Machine - Yanmar SV26 User Operation And Maintenance Manual

Mini excavator
Table of Contents

Advertisement

6 M
AINTENANCE BY THE OPERATOR
Before any upkeep or maintenance, follow the precautions described in this manual.

6.1 Daily maintenance

6.1.1 Checking the machine before use

Before each use of the machine, visually check the following :
– no missing, broken or loose parts
– ventilator belt correctly tightened
– no oil, water or fuel leaks
– engine and battery in good condition
To detect leaks, wear protective goggles and thick gloves. Use a piece of card or plywood to
detect leaks/sprays of hot oil. Consult a doctor immediately if you are hit with any oil.
Also check that the time counter, the headlights, the alarm and the lights are working
correctly.
If an element is not working or you think it is defective, shut down the machine's engine im-
mediately and contact your dealer.

6.1.2 Checks after using the machine

After each use, several checks must be carried out according to how the machine is used ; refer
to chapter :
6 Checks after use, page 89

6.1.3 Checking the commands

Operate the commands.
Release the levers, they should return to neutral position themselves.
If they do not, contact your dealer.

6.1.4 Checking the seat

Check that the safety belt is present and in good condition.
142
IMPORTANT
2.1 Precautions before maintenance, page 131

Advertisement

Table of Contents
loading

Table of Contents