Using The Room/Set Programming - Nortel ICS 6.1 Manual

188 / Using the Hospitality features
Û Ü ß Ý ß
3. Press
4. Press
5. At the Hospitality heading, press
displays.
6. Press
7. Press
If the number is less than 13, the display shows
, if required. Press
8. Press
9. Press

Using the room/set programming

This section describes how the room occupancy and room condition
settings are used.
Setting dialing filters by room state
²
1. Press
2. Enter the Desk admin password if you are prompted for a password.
The set displays:
3. Enter the room number and press
The set displays
4. Press the
room set.
5. To program other rooms, press the
return to step 3.
6. Press
¨
Note: Setting the room state to
Compact ICS 6.1 System Coordinator Guide
(ADMIN). The display shows
.
until the display shows
. displays.
and enter the hour (00 to 23).
to accept.
.
and enter the minutes (00 to 59).
¡ à á .
:
display key and select the required status for the
to exit.
until
. Press
displays.
.
.
or display key and
cancels any outstanding alarms.
.
to select
P0603544 02