Srx5600 Services Gateway Hardware Components; Srx5600 Services Gateway Chassis - Juniper SRX5600 Hardware Manual

CHAPTER 2
SRX5600 Services Gateway Hardware
Components

SRX5600 Services Gateway Chassis

Copyright © 2010, Juniper Networks, Inc.
Nearly all components of the SRX5600 Services Gateway are field-replaceable units
(FRUs), including the Switch Control Board (SCB), Routing Engine (RE), Service Processing
Cards (SPC), and I/O Cards (IOC), the power supply, fan tray, and filter.
This section includes the following topics:
SRX5600 Services Gateway Chassis on page 7
SRX5600 Services Gateway Card Cage and Slots on page 10
SRX5600 Services Gateway Midplane Description on page 10
SRX5600 Services Gateway I/O Cards on page 11
SRX5600 Services Gateway Flex I/O Cards and Port Modules on page 14
SRX5600 Services Gateway Services Processing Cards on page 19
SRX5600 Services Gateway Host Subsystem Description on page 22
SRX5600 Services Gateway Switch Control Board on page 22
SRX5600 Services Gateway Routing Engine on page 25
SRX5600 Services Gateway Craft Interface on page 28
SRX5600 Services Gateway Power System Description on page 32
SRX5600 Services Gateway Cooling System Description on page 37
SRX5600 Services Gateway Cable Manager Description on page 39
The services gateway chassis is a rigid sheet metal structure that houses all the other
components (see Figure 1 on page 8, Figure 2 on page 9, and Figure 3 on page 9). The
chassis measures 14.0 in. (35.6 cm) high, 17.45 in. (44.3 cm) wide, and 24.5 in. (62.2 cm)
deep (from the front to the rear of the chassis). The chassis installs in standard 800-mm
(or larger) enclosed cabinets, 19-in. equipment racks, or telco open-frame racks. Up to
five services gateways can be installed in one standard (48-U) rack if the rack can handle
their combined weight, which can be greater than 818 lb (371.0 kg). See "SRX5600
Services Gateway Physical Specifications" on page 4 for physical specifications for the
SRX5600 Services Gateway.
7