Srx5600 Services Gateway Hardware Components; Srx5600 Services Gateway Chassis - Juniper SRX5600 Hardware Manual

CHAPTER 2
SRX5600 Services Gateway Hardware
Components

SRX5600 Services Gateway Chassis

Copyright © 2014, Juniper Networks, Inc.
Nearly all components of the SRX5600 Services Gateway are field-replaceable units
(FRUs), including the Switch Control Boards (SCBs), Routing Engine (RE), Services
Processing Cards (SPCs), I/O cards (IOCs), the power supplies, the fan tray, the air filter,
and air deflector kits.
SRX5600 Services Gateway Chassis on page 7
SRX5600 Services Gateway Card Cage and Slots on page 10
SRX5600 Services Gateway Midplane Description on page 10
SRX5600 Services Gateway Interface Card Description on page 11
SRX5600 Services Gateway SPC Description on page 14
SRX5600 Services Gateway Host Subsystem Description on page 15
SRX5600 Services Gateway SCB Description on page 15
SRX5600 Services Gateway Routing Engine Description on page 16
SRX5600 Services Gateway Craft Interface on page 17
SRX5600 Services Gateway Power System Description on page 24
SRX5600 Services Gateway Cooling System Description on page 30
SRX5600 Services Gateway Cable Manager Description on page 32
SRX3400 and SRX5600 Services Gateways Air Deflector Kits on page 33
The services gateway chassis is a rigid sheet metal structure that houses all the other
components (see Figure 1 on page
chassis measures 14.0 in. (35.6 cm) high, 17.45 in. (44.3 cm) wide, and 24.5 in. (62.2 cm)
deep (from the front to the rear of the chassis). The chassis installs in standard 800-mm
(or larger) enclosed cabinets, 19-in. equipment racks, or telco open-frame racks. Up to
five services gateways can be installed in one standard (48 U) rack if the rack can handle
their combined weight, which can be greater than 1100 lb (500 kg). See
Services Gateway Physical Specifications" on page 4
SRX5600 Services Gateway.
8, Figure 2 on page 9, and
for physical specifications for the
Figure 3 on page 9). The
"SRX5600
7