Installing The Optional Lower Tray Assembly - Tektronix Phaser 560 User Manual

Installing the optional Lower Tray Assembly

An optional Lower Tray Assembly is available with the printer; it provides
two additional media trays (in addition to the standard media tray and the
multi-purpose feeder). Follow these steps to install the Lower Tray
Assembly.
Warning The printer weighs about 43 kg. (94 lbs.) and the Lower Tray
Assembly weighs about 14 kg (31 lbs.). Observe standard
precautions for lifting heavy objects.
The printer is not permanently attached to the Lower Tray
Assembly. When you move the printer, move the pieces
separately; moving the printer incorrectly may damage it and
may cause personal injury.
1. Place the Lower Tray Assembly on a solid, level table or cart you
have selected for your printer.
2.
Place the printer on top of the Lower Tray Assembly. Always keep
the printer upright.
3. Make sure that the front and back alignment pins fit in the holes in
the base of the printer.
3
Getting Set Up
2
9698-04
1
User Manual
2
2-7