Table of Contents
Advertisement
Bluetooth connection is not established.
Possible cause
Necessary pairing steps were not performed.
The communication system is not connected au-
tomatically despite successful pairing.
Too many Bluetooth devices are stored in the hel-
met.
There are additional vehicles with Bluetooth-capa-
ble devices nearby.
Bluetooth connection is disrupted.
Possible cause
Bluetooth connection to the mobile end device is
interrupted.
Bluetooth connection to the helmet is interrupted.
Volume in the helmet cannot be adjusted.
Remedy
Refer to the operating instructions of the commu-
nication system for the necessary steps for pair-
ing.
Switch off the communication system of the hel-
met and connect again after one to two minutes.
Delete all pairing entries in the helmet (see the
operating instructions of the communication sys-
tem).
Avoid simultaneous pairing with multiple vehicles.
Remedy
Switch off energy saving mode.
Switch off the communication system of the hel-
met and connect again after one to two minutes.
Switch off the communication system of the hel-
met and connect again after one to two minutes.
12
211
z
Advertisement
Table of Contents
