BMW R 1250GS Adventure Rider's Manual page 134

will cancel the remainder of the
7
routine.
132
Phase 1
All indicator and warning lights
are switched on.
After a longer standstill of the
vehicle, an animation is displayed
during the system start.
Phase 2
z
The general warning light
switches from red to yellow.
Phase 3
All switched on indicator and
warning lights are switched off
one after the other in reverse or-
der.
If one of the indicator and warn-
ing lights does not switch on:
Have the malfunction corrected
as soon as possible at an
authorized specialist workshop,
preferably an authorized
BMW Motorrad retailer.
ABS self-diagnosis
The self-diagnosis routine checks
whether the BMW Motorcycle In-
tegral ABS is ready for operation.
The self-diagnosis routine runs
automatically when you switch on
the ignition. To check the wheel
speed sensors, the motorcycle
must be driven a few meters
at a minimum speed of 3 mph
(5 km/h).
Phase 1
Check on system components
monitored by the diagnostic
system while motorcycle is
parked.
ABS indicator light flashes.
Phase 2
Check wheel sensors while
starting off.
ABS indicator light flashes.
ABS self-diagnosis
completed
ABS warning light goes out.
Check the display of all indica-
tor and warning lights.
An ABS error is indicated follow-
ing completion of the ABS self-
diagnosis routine.
It remains possible to continue
riding. Please be aware that
neither the ABS nor the inte-
gral function are available.
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Retailer.
ASC self-diagnosis
without riding modes Pro
The self-diagnosis routine checks
whether the BMW Motorcycle
ASC is ready for operation. The
self-diagnosis routine runs auto-
OE