Table of Contents
Advertisement
Clean the thread.
Turn the foot piece 2 into the
desired position.
Install the new screw 1.
Foot piece to gearshift
lever
Thread-locking compound:
Micro-encapsulated
7 lb/ft (10 Nm)
Footrests
with Option 719 milled part
OE
package, Classic
or
with Option 719 milled part
package, Storm
OE
or
with HP machined-parts pack-
OE
age
Adjust footrests
The footrest is adjusted the
same way when moving it right
or left.
The position of the footrest
must be set equally on the
right and left.
Remove screws 1.
Remove the footrest 3 from
the clamping block 2.
Remove screw 2.
Remove clamping block 1.
6
123
z
Advertisement
Table of Contents
