Table of Contents
Advertisement
Remove screw 1.
Release the left axle clamping
screw 2.
Slightly press the quick-release
axle inward for a better grip on
the right side.
Pull out the quick-release
axle 1 while supporting the
front wheel.
Place front wheel down and
roll it forward out of the front
suspension.
Remove the spacer bushing 1
from the wheel hub.
Installing the front wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications
Malfunctions during control inter-
ventions by ABS and ASC/DTC
Please see the information on
the effect of wheel sizes on
the ABS and ASC/DTC chassis
control systems at the begin-
ning of this chapter.
9
175
z
Advertisement
Table of Contents
