Table of Contents
Advertisement
the reason for the alarm for one
minute.
Light signals on DWA LED:
1 flash: motion sensor 1
2 flashes: motion sensor 2
3 flashes: ignition turned on
with unauthorized ignition key
4 flashes: alarm system dis-
connected from vehicle battery
5 flashes: motion sensor 3
Deactivation
with anti-theft alarm system
OE
(DWA)
Emergency on/off switch (kill
switch) in normal operating po-
sition.
Switch on the ignition.
Turn indicators light up once.
Confirmation tone sounds once
(if programmed).
DWA is switched off.
OE
with Keyless Ride
Press button 1 on the radio-
operated key once.
NOTICE
If the alarm function is deacti-
vated using the radio-operated
key and the ignition is not then
switched on, it will reactivate au-
tomatically after 30 seconds if
"activation after ignition off" is
programmed.
Turn indicators light up once.
Confirmation tone sounds once
(if programmed).
DWA is switched off.
Adjust DWA
Switching on ignition (
Call up menu Settings, Ve-
hicle settings, Alarm
system.
The following settings are avail-
able:
Adjust Warning signal
Turn Tilt sensor on and off
Turn Arming tone on and off
Turn Arm automatically on
and off
Adjustment options (
Adjustment options
Warning signal: Set rising
and falling or intermittent alarm
tone.
Tilt sensor: Activate the tilt
sensor to monitor the inclina-
tion of the vehicle. The anti-theft
alarm system responds if, for ex-
ample, if the wheel is stolen or
the motorcycle is towed.
4
58).
87
z
87)
Advertisement
Table of Contents
