Table of Contents
Advertisement
Slide pillion seat 2 forwards
4
and lift up to remove
Place pillion seat on clean sur-
90
face with the fabric side facing
down.
Installing passenger seat
z
Fit passenger seat centered
in rear mounts 1 and in front
mount 2.
Slide pillion seat to the rear.
Check pillion seat is properly
located.
Firmly press pillion seat 1
downwards.
Passenger seat clicks audibly
into place.
Install rider's seat (
92).
Remove rider's seat
Turn vehicle key 1 counter-
clockwise and hold while lifting
driver's seat 2 in rear area.
Remove driver's seat 2 from
seat bracket 3 toward rear.
Lay driver's seat on a clean
surface with the upholstered
side down.
Adjusting the seat height
and seat angle
Remove rider's seat (
90).
Advertisement
Table of Contents
