Table of Contents
Advertisement
Switch on ABS function
Press and hold button 1 until
the ABS indicator and warning
light changes its display behav-
ior.
Immediately after pressing the
button 1, the current ASC⁄DTC
system status and ABS system
status OFF! are displayed.
ABS indicator light goes
out, and starts to flash if
self-diagnosis has not been com-
pleted.
Possible ABS system status ON
is displayed.
Release button 1 after
changeover of the ABS system
status.
ABS indicator light remains
off or continues to flash.
ASC⁄DTC system status remains
unchanged and new ABS system
status ON is displayed for a short
time.
The ABS function is switched
on.
As an alternative, the ignition
can also be turned off and then
on again.
If the ABS indicator and
warning light lights up
after switching the ignition off
and on and then continuing
driving above the minimum
speed, an ABS fault has oc-
curred.
min 6 mph (min 10 km/h)
with riding modes Pro
If the coding plug is not in-
stalled, the ignition can also be
turned off and then on again as
an alternative.
Automatic Stability
Control (ASC)
Deactivating ASC function
without riding modes Pro
Switching on ignition (
NOTICE
The ASC function can also be
deactivated while riding.
OE
4
69
OE
58).
z
Advertisement
Table of Contents
