Table of Contents
Advertisement
NOTICE
ABS can only be adjusted in
ENDURO PRO riding mode.
Resetting the riding mode
settings
Setting up the PRO riding
mode (
78).
Select Reset and confirm.
The following factory settings
apply for ENDURO PRO RIDING
MODE:
DTC: Enduro Pro
ABS: Enduro Pro
ENGINE: Road
The following factory settings
apply for DYNAMIC PRO RID-
ING MODE:
DTC: Dynamic
ENGINE: Dynamic
Install coding plug
Switch off ignition (
Remove rider's seat (
ATTENTION
Penetration of dirt and mois-
ture in the open connector
Malfunctions
After removing the encoding
plug, refit the cover cap.
Remove the cover cap from
the plug connection 1.
59).
90).
To do this, push in the lock 1
and pull off the cap.
Insert the coding plug.
Switch on the ignition.
The symbol for the encoding
plug 1 is displayed. The rid-
ing modes ENDURO PRO and
4
79
z
Advertisement
Table of Contents
