Table of Contents
Advertisement
Shifting
6
Adjusting shift lever
122
z
Slacken screw 1.
Turn foot piece 2 into desired
position.
NOTICE
If the toe piece is set too high or
too low, this can cause problems
when shifting gears. In the event
of shifting problems, check the
toe piece setting.
Tighten screw 1 to specified
torque.
Treadplate (fixing) on
gear lever
6 lb/ft (8 Nm)
Adjusting gearshift lever
foot piece
with Option 719 milled part
package, Classic
OE
or
with Option 719 milled part
OE
package, Storm
or
with HP machined-parts pack-
OE
age
The distance between the
feet and the height of the foot
piece 2 can be adjusted by
turning the foot piece into dif-
ferent positions.
Remove screw 1.
Advertisement
Table of Contents
