Table of Contents
Advertisement
Gear not trained
with Gearshift Assistant Pro
The gear indicator flashes.
The gearshift assistant Pro
has no function.
Possible cause:
with Gearshift Assistant Pro
The transmission sensor has not
been programmed completely.
Shift to idle N and let engine
run at least 10 seconds while
the motorcycle is stationary so
that idle can be programmed
in.
Use clutch control to shift to
all gears and drive at least 10
seconds in each gear.
The gear indicator stops flash-
ing when the transmission sen-
sor has been programmed suc-
cessfully.
If the transmission sensor has
been programmed completely,
the Pro gearshift assistant will
operate as described (
If the programming procedure
is unsuccessful, have the fault
OE
eliminated at a specialist work-
shop, preferably an authorized
BMW Motorrad retailer.
Hazard warning lights
system switched on
OE
Left turn signal indicator
light flashes green.
Right turn signal indicator
light flashes green.
Possible cause:
The hazard warning lights system
was switched on by the rider.
Operating hazard warning flash-
ers (
66).
Service display
If service is overdue, the
due date or the odometer
reading at which service was due
is accompanied by the 'General'
warning light showing yellow.
157).
If service is overdue, a yellow CC
message is displayed. The dis-
plays for service, service date,
and remaining distance are also
highlighted with exclamation
marks in the menu windows MY
VEHICLE and SERVICE RE-
QUIREMENTS.
NOTICE
If the service display appears
more than a month before the
service date, the current day's
date must be reset in the in-
strument cluster. This situa-
tion can occur if the battery was
disconnected.
Service due
Displayed in white.
Service due! Have a
service performed at a
specialist workshop.
3
55
z
Advertisement
Table of Contents
