Table of Contents
Advertisement
The ASC function is switched
on.
Alternatively, turn the ignition
off and on again.
If the ASC indicator and
warning light lights up
after switching the ignition off
and on and then continuing
driving with the following min-
imum speed, a ASC fault has
occurred.
min 3 mph (min 5 km/h)
More detailed information on
the Automatic Stability Control
can be found in the "Technol-
ogy in detail" chapter:
How does ASC work? (
Dynamic Traction
Control (DTC)
with riding modes Pro
Deactivating DTC
Switch on the ignition.
NOTICE
The Dynamic Traction Control
(DTC) can also be deactivated
while riding.
149)
Press and hold button 1
until the DTC indicator light
changes its behavior.
Immediately after pressing the
button 1, the DTC system sta-
OE
tus ON and current ABS system
status are displayed.
DTC indicator and warning
light lights up.
Possible DTC system
status OFF! is displayed.
Release button 1 after
changeover of the status.
The new DTC system
status OFF! is displayed for a
short time. The ABS system
status remains unchanged.
DTC indicator and warning
light remains illuminated.
The DTC function is switched
off.
4
71
z
Advertisement
Table of Contents
