Table of Contents
Advertisement
ATTENTION
Switching on off-road mode
(ENDURO and ENDURO PRO)
when riding on public roads
Risk of falling due to unstable
riding conditions when braking or
accelerating in the ABS or ASC/
DTC control range
Switch on off-road mode
(ENDURO and ENDURO PRO)
during off-road riding only.
Press button 1 repeatedly un-
til the desired riding mode is
shown.
NOTICE
In the factory setting, the ABS
control for the rear wheel is de-
activated when the ENDURO PRO
riding mode is active.
The following riding modes can
be selected:
RAIN: For riding on rain-slicked
roads.
ROAD: For riding on dry roads.
with riding modes Pro
The following riding modes are
additionally available for selection:
DYNAMIC: For dynamic riding
on dry roads.
ENDURO: For off-road riding
with road tires.
with riding modes Pro
With an integrated coding plug,
the riding modes ENDURO PRO
and DYNAMIC PRO replace
the riding modes ENDURO and
DYNAMIC.
DYNAMIC PRO: For dynamic
riding on dry roads, taking ac-
count of the settings made by
the rider.
ENDURO PRO: For off-road rid-
ing with lugged off-road tires,
taking account of the settings
made by the rider.
When the motorcycle is sta-
tionary, the selected riding
OE
mode is activated after approx.
2 seconds.
The new riding mode is acti-
vated during operation under
the following conditions:
Throttle grip is in idle position.
Brake is not engaged.
Cruise control is not active.
OE
The riding mode selected and
its associated engine-charac-
teristic, ABS, ASC ⁄ DTC and
Dynamic ESA settings are re-
4
77
z
Advertisement
Table of Contents
