Jump-Starting - BMW R 1250GS Adventure Rider's Manual

9
182
Fit the screw 1.
Replacing LED tail light
The LED tail light can only be
z
completely replaced.
Please contact a specialist
service facility for this pur-
pose, preferably an authorized
BMW Motorrad retailer.
Replace LED headlights
LED headlights can only be re-
placed as a complete unit. For
details please contact a spe-
cialist service facility, preferably
an authorized BMW Motorrad
Retailer.
Replace additional LED
headlight
with LED additional
OA
headlight
The LED additional headlights
can only be completely replaced;
it is not possible to replace indi-
vidual LEDs.
Please contact a specialized
workshop, preferably an autho-
rized BMW Motorrad retailer.

Jump-starting

ATTENTION
Current too high when jump-
starting the motorcycle
Cable fire or damage to the mo-
torcycle electronics
Do not jump-start the motor-
cycle using the power socket,
only via the battery terminal.
ATTENTION
Contact between crocodile
clips of jump leads and mo-
torcycle
Danger of short circuit
Use jump leads fitted with fully
insulated crocodile clips at both
ends.
ATTENTION
Jump-starting with a voltage
higher than 12 V
Damage to the motorcycle's
electronics
The battery of the donor mo-
torcycle must have a voltage of
12 V.
Park motorcycle, ensuring that
support surface is firm and
level.
Remove battery cover (
Do not disconnect the battery
from the onboard electrical sys-
185).