Table of Contents
Advertisement
Turn off ignition.
Remove screw 1.
Pull glass on screw connection
side out of mirror housing.
Remove light source 1 from
the mirror housing by turning it
counterclockwise.
Replace defective light source.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
To protect glass on new bulb
against contamination, always
use a clean, dry cloth to hold it;
do not touch with bare fingers.
Fit bulb 1 in mirror housing by
turning it clockwise.
Locate lens in mirror housing
inner side first and close.
9
181
z
Advertisement
Table of Contents
