Back Panel Controls And Features; Pci Riser Assembly - Avaya CallPilot 1006r Hardware Installation

Back panel controls and features

The following diagram shows the back panel controls and features. On the right are the AC
power supply banks. The PCI card brackets are in the middle of the back panel while the
connectors and ports are along the bottom and left side.
Figure 3: Back panel controls and features
Label
A RJ-45 Serial A Connector
B Rear Video
C Dual USB port
D Dual USB port
E ELAN
F CLAN
G HB1
H Mirror

PCI riser assembly

The PCI riser assembly holds the MPB96 PCI add-in cards. For more information about your
configuration, see
the PCI riser held above the server.
Avaya CallPilot® 1006r Server Hardware Installation
Control or feature
Valid PCI card configurations
Back panel controls and features
Label Control or feature
I Not connected
J HB2
K Power Receptacles
L MPB96-1 DS30-3
M MPB96-1 DS30-2
N MPB96-1 DS30-1
on page 16. The following diagram shows
December 2010 13