Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 598

COPIER (Service mode for printer) > DISPLAY (State display mode) > DENS
P-D-P-C 2
Detail
Use Case
Display/Adj/Set Range
Appropriate Target Value
P-B-P-Y 2
Detail
Use Case
Display/Adj/Set Range
Appropriate Target Value
P-B-P-C 2
Detail
Use Case
Display/Adj/Set Range
Appropriate Target Value
P-B-S-Y 2
Detail
Use Case
Display/Adj/Set Range
Appropriate Target Value
P-B-S-C 2
Detail
Use Case
Display/Adj/Set Range
Appropriate Target Value
P-D-S-Y 2
Detail
Use Case
Display/Adj/Set Range
Appropriate Target Value
Dspl front side (C/Bk) drk crrnt (Pwave)
To display the C/Bk-color dark current (P-wave) detected by the Registration Patch Sensor (Front).
At low density or fogging deterioration, use this item to check whether there is a problem in the
Registration Patch Sensor (Front).
At low density or fogging deterioration
0 to 1023
10 - 100
Dspl ITB rear side base intnsty (Pwave)
To display the ITB background light intensity (P-wave) detected by the Registration Patch Sensor
(Rear).
At low density or fogging deterioration, use this item to check whether there is a problem in the
Registration Patch Sensor (Rear).
At low density or fogging deterioration
0 to 1023
300 - 900
Dspl ITB front side base intnsty (Pwave)
To display the ITB background light intensity (P-wave) detected by the Registration Patch Sensor
(Front).
At low density or fogging deterioration, use this item to check whether there is a problem in the
Registration Patch Sensor (Front).
At low density or fogging deterioration
0 to 1023
300 - 900
Dspl ITB rear side base intnsty (Swave)
To display the ITB background light intensity (S-wave) detected by the Registration Patch Sensor
(Rear).
At low density or fogging deterioration, use this item to check whether there is a problem in the
Registration Patch Sensor (Rear).
At low density or fogging deterioration
0 to 1023
10 - 300
Dspl ITB front side base intnsty (Swave)
To display the ITB background light intensity (S-wave) detected by the Registration Patch Sensor
(Front).
At low density or fogging deterioration, use this item to check whether there is a problem in the
Registration Patch Sensor (Front).
At low density or fogging deterioration
0 to 1023
10 - 300
Dspl rear side (Y/M) drk crrnt (Swave)
To display the Y/M-color dark current (S-wave) detected by the Registration Patch Sensor (Rear).
At low density or fogging deterioration, use this item to check whether there is a problem in the
Registration Patch Sensor (Rear).
At low density or fogging deterioration
0 to 1023
10 - 100
576
8. Service Mode