Alarm Code; Alarm Code Details - Canon imageRUNNER ADVANCE C3500 III Series Service Manual

Alarm Code

Alarm Code Details

00-0085
A. Operation / B. Cause /
C. Remedy
00-0246
A. Operation / B. Cause /
C. Remedy
00-0247
A. Operation / B. Cause /
C. Remedy
01-0001
A. Operation / B. Cause /
C. Remedy
01-0002
A. Operation / B. Cause /
C. Remedy
01-0004
A. Operation / B. Cause /
C. Remedy
01-0005
A. Operation / B. Cause /
C. Remedy
02-0025
A. Operation / B. Cause /
C. Remedy
A notice of stat
-
Error code display (4-digit)
Soft counter PCB cannot write normally.
Error code display (4-digit)
Soft counter PCB cannot restore data.
Notification of disabled to obtain counter values for a certain period of time
Counter information is not set to UGW
* Not displayed on service mode history due to the alarm being generated by UGW
No change in device status after specified period of time has passed (RDS server creates)
-
Notification of IP address change
IP address has been changed
* Not displayed on service mode history due to the alarm being generated by UGW
Restricted operation notification
The device entered limited function mode for some reason.
* Not displayed on service mode history due to the alarm being generated by UGW
Insufficient Scanner Unit (Paper Front) LED light intensity alarm (Some of the LEDs are OFF.
Scanning can be continued.)
In the case that the light intensity is insufficient at LED lighting.
469
7. Error/Jam/Alarm