Operation Method - Canon imageRUNNER ADVANCE C3500 III Series Service Manual

FAX (Serivce Mode for FAX)
Overview
■ Configuration of the Service Mode
Service mode is divided into the following 10 items (#1 to #10).
Item Name
#1 SSSW Service software
switch
#2 MENU Menu switch setting
#3 NUMERIC Par- Setting of numeric pa-
am. rameters
#4 NCU (Adjustment by a
service technician is
not possible.)
#5 TYPE Country setting
#6 IPFAX Communication set-
tings of IPFAX
#7 PRINT Printer function set-
ting
#8 CLEAR Data initialization
mode setting
#9 TEST Test Mode
#10 REPORT Service Report
CAUTION:
If a 2nd line fax option is installed, IPFAX cannot be used.

■ Operation method

1. Enter service mode.
This can be used to conduct the registration/settings relating to basic functions of the fax,
such as error management, echo prevention and prevention of communication problems.
This can be used to conduct the registration/settings relating to the required functions at
installation, such as NL equalizer, transmission level.
This can be used to enter numeric parameters.
The values of this item are collectively set based on the setting of #5 TYPE.
If the item "STANDARD" displayed on the display is set, #4 NCU data is collectively set to
comply with the communication standards in Japan.
If the license option for IPFAX has been enabled, IPFAX is displayed.
This can be used to conduct the registration/settings relating to the printer basic service
functions, such as size reduction conditions for received images.
This item is to initialize each data.
To execute various tests.
To execute report print.
958
Description
8. Service Mode