Removing The Lifter Drive Assembly - Canon imageRUNNER ADVANCE C3500 III Series Service Manual

3. Remove it from the lower direction so as not to hit the Low Voltage Power Supply Unit.
CAUTION:
Use caution to pull out the Main Drive Unit fully and horizontally. Otherwise, the coupling may be caught on the Rear Plate
and be damaged.

Removing the Lifter Drive Assembly

■ Preparation
1. Pull out the Cassette 1.
2. Open the Front Cover.
3. Remove the Drum Unit.
4. Remove the Developing Unit.
5. Remove the Cover (Rear Upper).
6. Remove the Cover (Rear Lower).
7. Remove the Main Controller
8. Remove the Main Drive
9. Remove the Motor Fan."Removing the Motor Fan" on page 160
10. Remove the Low Voltage Power Supply
11. Remove the Secondary Transfer High Voltage
162
PCB."Removing the Main Controller PCB" on page 191
Unit."Removing the Main Drive Unit" on page 222
Unit."Removing the Low Voltage Power Supply Unit" on page 161
PCB."Removing the Secondary Transfer High Voltage PCB" on page
225
4. Parts Replacement and Cleaning