Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 1048

7. Securely tighten the coin screws of the host
machine and the 2-cassette Pedestal.
CAUTION:
• When tightening the coin screws, pay attention to
plates and parts around the screws.
• When tightening a screw on the rear side, be
careful not to drop it.
• Be sure to check that the coin screws have been
tightened securely.
3x
8. Perform the following work before turning ON the
power.
• Remove the paper on the Copyboard Glass.
• Remove the Scanner System Fixation Screws.
CAUTION:
It is recommended to keep the Scanner System
Fixation Screws in a safe place for moving the
machine.
•
• If the Cassette Pedestal is installed, turn the 3
adjusters of the Cassette Pedestal to fix it in place.
• If the Cassette Pedestal is installed, securely
tighten the coin screws of the host machine and the
2-cassette Pedestal.
CAUTION:
• Be careful not to damage nearby plates and parts
when tightening the coin screws.
• When tightening a screw on the rear side, be
careful not to drop it.
• Be sure to check that the coin screws have been
tightened securely when moving the machine.
9. Perform the following to check that there is no
abnormality in images after turning ON the power.
• Copy
• Print
• Image Position Adjustment
1026
9. Installation