Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 1047

When Relocating the Machine
When relocating this machine by truck or by other means for
some reasons after installing the machine, perform the
following procedure.
CAUTION:
In case of relocating the machine while it is mounted
on the Cassette Pedestal, be sure to check that the
coin screw has been tightened securely before holding
the grips of the machine to lift when, for example,
passing over a difference in level of the floor. Holding
the grips of the machine when lifting will result in
separation of the machine from the Cassette Pedestal.
1. From the following service mode (Level 2), move the
Scanner Unit to the position to secure.
COPIER > FUNCTION > MISC-R > RD-SHPOS
2. Turn OFF the main power.
3. Disconnect the power plug of the host machine.
4. If the Cassette Pedestal is installed, turn the 3
adjusters of the Cassette Pedestal with a
screwdriver, etc. to lift them from the floor.
5. Secure the Scanner Unit with the Scanner System
Fixation Screws that have been kept in a safe place
since installation.
2x
6. Put a sheet of paper on the Copyboard Glass.
1025
9. Installation