Position To Affix The Service Label; Output Of Service Print Data - Canon imageRUNNER ADVANCE C3500 III Series Service Manual

• Exit the Remote Operation Viewer.
• Disconnect the network (disconnect the network cable, disable the network function, etc.).
• Shut down or restart the machine.

Position to Affix the Service Label

Adjustment is made to every machine at the time of shipment and the adjustment value is written down in the service label.
When replacing the DC Controller PCB or clearing RAM, the adjusted values of ADJUST and OPTION return to the default;
therefore, be sure to adjust the value in the field, and in the case of changing the service mode value, be sure to write down the
changed value in the service label. When the corresponding item is not found on the service label, write the value in blank field.
The service label of this machine is affixed to the position shown below.

Output of Service Print Data

• The service print data such as P-PRINT can be output as a file.
• By executing the following service mode, data at the time can be saved in the HDD.
Service Mode Level 1 > Copier > Function > MISC-P > RPT-FILE
• The saved data will be deleted from the HDD when it is exported to SST or a USB flash drive.
• When multiple service data such as P-PRINT and HIST-PRINT is saved in the HDD of the host machine, it is collectively
exported to SST or a USB flash drive.
• It can be exported to SST or a USB flash drive by entering download mode even when the host machine has stopped because
of no paper.
DCON Setting Items
RCON Setting Items
540
8. Service Mode