Removing The Reader Flat Cable - Canon imageRUNNER ADVANCE C3500 III Series Service Manual

CAUTION:
Insert the 4 Edges [1] of the protection sheet to the Guide Part [A].
9. Actions after Replacement:
• Single Pass DADF-A1, B1 : Scanner Unit (Front side)
281
• DADF-AV1: Scanner Unit
NOTE:
Actions after replacing the Scanner Unit also can be adjusted on the situation mode below.
• SITUATION > Parts Replacement > Adjustment during Scanner unit replacement

Removing the Reader Flat Cable

■ Preparation
1. Remove the Reader Scanner
2. Remove the Cover (Rear Upper).
■ Procedure
1. Remove the Controller Cover.
2. Remove the Reader Cable Cover [1].
• 3 Screws [2]
• 2 Claws [3]
[1]
[1]
[A]
:"DADF-AV1: Scanner Unit" on page 282
Unit."Removing the Reader Scanner Unit" on page 176
3x
[3]
[1]
179
4. Parts Replacement and Cleaning
[A]
[1]
[1]
:"Single Pass DADF-A1,B1 : Scanner Unit (Front side)" on page
[3]
[2]