Table of Contents
Advertisement
Removing the Intermediate Guide
■ Preparation
NOTE:
If waste toner has overflowed onto the Intermediate Guide, this waste toner can be fed into the Waste Toner Container by operating
the Waste Toner Feed Motor (M17).
• COPIER > FUNCTION > PART-CHK > MTR = 14
1. Fully open the Right Door.
2. Remove the ITB Unit.
3. Remove the Front Cover .
4. Remove the Toner Bottle.
5. Remove the Drum Unit (Y).
6. Remove the Developing Unit (Y).
7. Remove the Left Cover (Upper).
8. Remove the First Delivery Tray.
9. Remove the Toner Bottle Mount.
■ Procedure
1. Remove the Right Front Upper Cover [1].
• 2 Screws [2]
• 2 Claws [3]
1x
2x
[3]
4. Parts Replacement and Cleaning
1x
[1]
[2]
[2]
239
Advertisement
Table of Contents
Troubleshooting
